SHOWER UPGRADE 101 - TOP TIPS FOR NEW UNIT INSTALLATION

Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Make An Appointment



We've stumbled on this post about Simple ways to Install a Shower Cubicle on Your Own directly below on the internet and decided it made perfect sense to share it with you on my blog.


Simple ways to Install a Shower Cubicle on Your Own
An effective shower installment needs cautious planning and a great deal of job. For the most part, you will need to do three types of tasks: framing walls, installing the plumbing, and also ending up wall surfaces.

Prep work


First of all, you should choose the type of shower that you wish to install. It is necessary to establish whether the selected shower is capable of dealing with certain systems and also can manage a risk-free level of water through the boiler. The majority of shower devices nowadays are created to be flexible to various water stress (such as kept hot water and cool keys).
It is likewise essential to take into account the water pressure and also the planning of the piping and water drainage for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be attached to the bathroom tap based on your requirement, and also the water temperature can be readjusted by means of the taps. Push-on mixers are cheap as well as extremely straightforward to set up. Nonetheless, although the hose link is easy, it is conveniently dislodged. In addition, it is troublesome to readjust the temperature.

  • Bath/Shower Mixer: The tube and spray of this sort of shower are combined with a bathroom mixer tap, as well as the temperature can be changed via the bath faucets. It is a very affordable option as well as no added plumbing is included. Nonetheless, the bath/shower mixers also experience troublesome temperature level control options.

  • Handbook Mixer: The tube as well as spray of a hand-operated mixer shower unit belong of the wall surface unit as well as the cold and hot water supplies are linked to a solitary valve The temperature and also stress of the water are controlled with either one or a selection of knobs (in much more pricey showers). Although temperature control is much easier in hands-on mixer kinds, they are more costly than the formerly stated mixers. They additionally call for additional plumbing of hot and cold water pipes.

  • Thermostatic Mixer: The pipe and also spray of this shower type belong of the wall surface unit as well as the cold and hot water supplies are linked to a solitary valve right here also. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to prevent it from ending up being also hot. One of the greatest benefits of a thermostatic mixer shower type includes practical temperature level control. However, it is the most costly of the various mixer options.

  • Power Shower: A power shower is a single system having a powerful electric pump that can modifying both the water pressure and temperature. This kind of shower can be fitted if there is water from a cold water tank and a hot water cylinder. A power shower makes the modification of both stress and also temperature level easy. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is provided by a mix central heating boiler under keys stress.

  • Electric Shower: An electric shower is plumbed into a keys cold water supply and also it heats the water electrically. It is essential to note that for this shower type to be set up, the mains stress requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature level and also stress to be readjusted via a knob. Models with temperature stabilisers are better as they remain unaffected by other faucets elsewhere in use within the household. A major drawback of electrical showers is that the control handle just permits the alternative of heats at much less stress, or lower temperatures at a greater pressure. This is problematic in the winter season when the spray is often weak and the keys water is cooler. Nonetheless, this trouble is dealt with in some designs which are offered with a winter/summer setting.


  • Method


    Depending on the sort of shower you want to set up, the shower head should either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it needs to have a check valve.
    Before beginning, it is suggested to note the settings of the shower head and control, and to intend the pipe-work included. Furthermore, the drainage system to remove the drainage will certainly need to be planned. Both placements of the cord path and also the shower button will additionally require to be thought about if an instant or electrical shower system is being installed.
    Make use of the guideline guide provided with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is very important to cut off the water system. In order to safeguard the pipes, they must be provided a waterproof covering as well as also fitted with isolating shutoffs. The pipes can after that be buried into the wall surface and smudged over to neaten the general appearance.
    Fit the base tray, shower head, as well as fittings.
    Attach the primary shower control to the pipelines that will be supplying the water (This might require a women screw thread adapter).
    Reconnect the water as well as examination the pipes for any kind of leakages, as some may need firm.
    If you are installing an electrical shower, bear in mind to switch off the electrical energy supply before making any type of electric connections. When these links have been made (there must be advice within the instruction manual), the power supply can be changed back on.

    Readjusting Water Pressure to Fit Your Shower


    The cold water storage tank can be lifted to a higher elevation (sometimes as low as 150mm (6inches)) by installation a solid wooden support underneath it - perhaps composed of struts as well as blockboards. If you pick this choice, the major and distribution pipelines will certainly additionally have to be increased to fulfill the brand-new height of the tank.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it should be linked right into the power supply in order to run.

    Piping and also Water drainage


    It is best to use 15mm diameter supply pipelines, and also make the runs to the shower as short as well as straight as feasible so as to maintain maximum stress and also minimise heat loss. Furthermore, by reducing the use of elbow joints for pipeline edges, you can lower the resistance in the flow of the supply of water. You can accomplish this by flexing the pipelines rather.

    Most Typical Errors


  • Going against or ignoring local code limitations.

  • Utilizing pipelines that are also tiny.

  • Attaching copper to galvanized without using a brass or dielectric fitting between the two.

  • Not utilizing tape or pipeline substance at threaded joints.

  • Uneven your components when mounting them.

  • Not mounting an air gap filling for fixtures.

  • Cutting supply stub outs too short to set up the shutoff valves onto after the completed wall is in location.

  • Not appropriately lining up tubes right into installations or quit valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will trigger a leak.).

  • When transforming the water back on in your house, constantly run the outdoors pipe shutoff or purge your bathrooms to hemorrhage dirt as well as air from the lines. This debris can trigger troubles in your sink taps and also various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Direct-to-Stud Shower Enclosure

    I found that blog entry about Simple ways to Install a Shower Cubicle on Your Own while doing a lookup on the search engines. Make sure you set aside a second to distribute this content if you appreciated it. Thank you for your time. Please stop by our website back soon.




    Schedule A Free Estimate


    Report this page